Sartolab® P20 Pressure Filter 18072----------D, 0.7 µm GF
收藏
收藏
***
- 产品详情
- 产品参数
Sartolab® P20 Pressure Filter 18072----------D, 0.7 µm GF
Sartolab® P20 units can be processed with pressure using a syringe, a membrane pump, or a tube pump. This allows the quick and reliable sterilisation of 100 ml to 5 liter of media and aqueous solutions. The large filtration area (20 cm²) ensures high flow rates and optimal total throughputs. Versions with GF pre-filter have a higher chemical compatibility than units with SFCA. Thus, they can be used with alcohols and other solvents but have no PTFE vent ports as Sartolab® P20 filters with SFCA membrane.
Fast filtration
Economic
Highest throughput
Suitable for aqueous and solvent samples
Product properties
| 流速 | 1000 mL/min with water at 1 bar (14.5 psi) |
| 过滤面积 | 20 cm² |
| Wettability | Hydrophilic |
| 无菌性 | 非无菌 |
| 预过滤器材质 | No Prefilter |
| 灌注钟罩 | No |
| 型号 | Sartolab® |
| 初级产品类型 | Filtration Devices |
| 膜材料 | 玻璃纤维(GF) |
| 包装 | 非无菌包装 |
| 颜色 | Clear |
| 连接器入口 | Female Luer Lock |
| 连接器出口 | Hose Barb 6–12 mm Stepped |
Technical attribute
| 填充体积 | 6 mL |
| 滤器直径 | 50 mm |
| 操作压力 | 3 bar (44 psi) |
| 残留体积 | 1 mL before bubble point |
| 爆破压力 | Min. value 5.0 bar (72.5 psi) |
| 起泡点 | 最小水值0.5 bar (50 kPa, 7 psi) |
| 外壳尺寸 | 64 × 50 mm |
| 颗粒截留 | 0.7 µm |
| 最高温度 | 50° C |
| 通气孔 | No vent |
| 生物安全性 | 滤器所有元件的材质都通过目前USP塑料VI级生物反应测试<88>(全身注射、皮内和植入测试)。 |
| 外壳材料 | Polycarbonate (PC) |
| 总通量 | Up to 10 L |
| 应用 |
|
| 应用领域 |
|
| 样品类型 |
|
| 超滤设备类型 |
|
| pH范围 | 1.0 – 8.0 |
| Sterilization Method |
|
价格
***
型号
18072----------D
产品品牌
Sartorius ( 赛多利斯)
产品分类
微生物产品
