- 产品详情
- 产品参数
套装包含：
LR 1000 control Package
RC 2 basic
labworldsoft®软件 免费
H.PUR.8.R (2x) 免费
LR 1000.70 Lid Holder 免费
The LR 1000 control is a cost efficient, modular laboratory reactor designed for optimizing chemical reaction processes as well as for mixing, dispersing and homogenization applications at the laboratory scale. The system can be adapted quickly and easily for a wide range of applications and specific requirements. The reactor is especially designed for the unique applications requirements that define the cosmetic and pharmaceutical industries. The temperature of the medium can be as high as 120 ºC. The temperature of the heating source, which is located at the bottom of the vessel, is controlled accordingly to reach the set temperature inside the medium. A PT 100.30 temperature sensor and the corresponding receptacle LR 1000.61 for the lid are included with this package. Prominent features of the LR 1000 control system are the integrated pH sensor connection and the display interface. The latter allows for the display of all process-relevant data onto a PC, save data storage and control of the reactor. The software (accessory) allows for further adaptation of the overall system and processes.
Metals in contact with medium: stainless steel ( ALSI 316 L), FFKM, PTFE, PEEK, borosilicate glass 3.3
Large easy to read TFT display for better image quality and easy navigation
Integrated weighing funktion
Torque trend measurement indicates changes in product viscosity
Integrated pH sensor connection
RS 232 and USB interface to operate the unit with the laboratory software labworldsoft
Standard joint fittings on the lid: 2 x NS 29, 2x NS 14, 2 x GL 14 for flexible adaptation of further equipment
Expandable for use with the ULTRA- TURRAX® T 25 digital (Accessory)
Vacuum valve included with delivery
Anchor stirrer with PTFE-scrapers
Connections to attach a cooling source to the back of the unit
Manual adjustable safety circuit
Integrated safety shutdown when vessel or lid is removed from the base
技术参数
| 最大使用容积 | 1000 ml |
| 带分散刀具的最小样品处理量 | 300 ml |
| 不带分散刀具的最小样品处理量 | 500 ml |
| 最高工作温度 | 120 °C |
| 可达到真空 | 25 mbar |
| 最大粘度 | 100000 mPas |
| 速度范围 | 10 - 150 rpm |
| 支杆直径(含集成固定支架) | 16 mm |
| 物料接触部分材料 | AISI 316L, 1.4571, 硼硅盐玻璃 3.3, PTFE, PEEK, FKM |
| 反应容器开口(件数/标准) | 2x NS 29/32, 2x NS 14/23 & 2x GL 14 |
| 允许连续运转时间 | 100 % |
| 温度测量精度 | 0.1 K |
| 额定转矩 | 3 Nm |
| 加热输出功率 | 1000 W |
| 冷却介质允许工作压力 | 1 bar |
| 最大称重范围 | 2000 g |
| 称量分辨率 | 1 g |
| 最小转速 (可调节) | 10 rpm |
| 最大加热温度 | 180 °C |
| 可调的安全回路，温度上限 | 225 °C |
| 可调的安全回路，温度下限 | 47 °C |
| 可调的安全回路，温度上限偏差 | 20 ±K |
| 可调的安全回路，温度下限偏差 | 10 ±K |
| 冷却介质最低温度 | 3 °C |
| 加热温度控制精确度 | 1 ±K |
| 带传感器控温精确度 | 0.2 ±K |
| 转速偏差 | 5 ±rpm |
| 转速显示 | TFT |
| 加热温度控制 | TFT |
| 外接温度传感器接口 | PT 100 |
| 搅拌桨固定 | 特殊输出轴 |
| 转矩显示 | 是 |
| 转矩测量 | 趋势 |
| 计时器 | 是 |
| 计时器显示 | TFT |
| 转速控制 | 1 RPM/步 |
| 冷却方式 | 流量 |
| 温度显示 | 是 |
| 工作温度传感器 | PT 100 |
| 安全温度传感器 | PT1000 |
| 工作温度显示 | TFT |
| 安全温度显示 | TFT |
| 外接传感器使用显示 | 是 |
| 保险断路 | 是 |
| 转动可逆方向 | 不 |
| pH传感器接口 | 是 |
| pH值显示 | TFT |
| 外形尺寸 | 443 x 360 x 295 mm |
| 重量 | 16 kg |
| 允许环境温度 | 5 - 40 °C |
| 允许相对湿度 | 80 % |
| DIN EN 60529 保护方式 | IP 21 |
| RS 232接口 | 是 |
| USB接口 | 是 |
| 模拟输出 | 不 |
| 电压 | 230 / 115 V |
| 频率 | 50/60 Hz |
| 仪器输入功率 | 1200 W |
